Dimond
SEARCH
New User   |  Sign in
 
 

Corrugate



Although conceived over 100 years ago it is still as modern as today’s age of technology can make it. Corrugate’s wide sheet cover, rapid fixing and low material cost make it the most economical roof and wall cladding material available. It lends its graceful appearance and economy of fixing to almost any type of building structure. Corrugate has been successfully used on a wide variety of projects such as the Auckland City Acute Mental Health Care Unit.


Cover:
762mm Sheet Width: 851mm
Minimum Pitch 8° (approx 1:7)

 

ROOFING SPAN CAPACITY CHART
  CLADDING SPAN CAPACITY CHART
Thickness End Span Internal Span
0.40mm 0.70m 1.00m
0.55mm 1.00m 1.50m
 
Thickness End Span Internal Span
0.40mm 1.20m 1.70m
0.55mm 1.70m 2.40m
* To suit ultimate wind loads up to 3 kPa

Note: Spans shown above are for steel. When using other materials please call 0800 Dimond for more info.

All roofing spans shown are maximum spans to suit occasional foot traffic only. Not suitable for use as a platform for maintenance work.

TOP

For comprehensive information on Dimond systems which include CAD drawings, Installation documents and PDF downloads, use one of the following links below

Dimond Roofing & Cladding Systems Manual
Dimond Roofing & Cladding Systems Manual
Dimond Structural Systems Manual
Dimond Structural Systems Manual

Technical Documents
Documents Drawings Drawings
2.1.4.8. CORRUGATE 20


Roofing_Manual_Lite.pdf  a lite version of the Roofing & Cladding Systems Manual (PDF - 1.4MB)

Download Roofing/Cladding installation Info (PDF - 560KB)

 
A Fletchers Building Company © Dimond, all rights reserved. Please read our Privacy Policy and Terms & Conditions.
Dimond is a member of the Roofing Association of New Zealand Roofing Association NZ

Powered by streamSWEET CMS