Dimond Durolite FireGuard

Dimond Durolite FireGuard (FG2 and FG3) Natural Lighting

Suitable for light commercial

Suitable for commercial

Durolite FireGuard is manufactured in Auckland.

Suitable for Hips

Suitable for Rake Cuts

Suitable for Valleys

Suitable for Mono-pitch

If this product is not suitable for your project... Click here to find product options suitable for your requirements.

Durolite FireGuard 2 (FG2) and Durolite FireGuard 3 (FG3) - which has a bromine free formulation,  have been developed to provide a natural lighting sheet, while meeting the fire requirements of the New Zealand Building Code (NZBC).

Dimond Natural Lighting Systems require at least the following maintenance as a minimum to ensure the guaranteed performance is achieved. Additional regular maintenance can extend the useful life of the products.

  1. Keep surfaces clean and free from continuous contact with moisture and debris. Wash at least annually using a soft bristle brush to remove dirt build-up.
  2. Inspect and replace any fasteners and washers that have deteriorated sufficiently to cause leakage risk or noticeable staining.
A member of the Fletcher Building Group. A member of the Roofing Association of New Zealand A member of the NZ Metal Roofing Manufacturers Inc. A member of the NZ Metal Masterspec partners

Please read our Disclaimer, Privacy Policy and Terms & Conditions. 
© Dimond, all rights reserved.

Website strategy and design by Traffic www.traffic.net.nz

Fletcher Reinforcing - Structured for strengthEasysteel - a Fletcher Building companyCycloneColorCote - the right roof always lasts longer
Find An Installer

Share to social media