Dimond Durolite FireGuard

Dimond Durolite FireGuard (FG2 and FG3) Natural Lighting

Suitable for light commercial

Suitable for commercial

Durolite FireGuard is manufactured in Auckland.

Suitable for Hips

Suitable for Rake Cuts

Suitable for Valleys

Suitable for Mono-pitch

If this product is not suitable for your project... Click here to find product options suitable for your requirements.

Durolite FireGuard 2 (FG2) and Durolite FireGuard 3 (FG3) - which has a bromine free formulation,  have been developed to provide a natural lighting sheet, while meeting the fire requirements of the New Zealand Building Code (NZBC).

Product performance is covered by the following warranty

  • Will not suffer excessive yellowing and degradation to cause a light transmission loss of more than 25% from the original value when installed, for a period of 25 years from installation.
  • Will not delaminate, surface erode away, allow protrusion of the reinforcing fibres through the surface, or fracture due to impact from hailstones up to 20mm diameter accompanied by winds of up to 100km/hr, for a period of 20 years from installation.
  • Will not permit water to penetrate right through the sheet for a period of 25 years from date of installation.
  • Durolite FG2 will meet a Group 2 number in accordance with the NZBC verification method C/VM2 Appendix A.
  • Durolite FG3 will meet a spread of flame Group 3 number in accordance with the NZBC verification method C/VM2 Appendix A.

These guarantees are subject to conditions relating to correct storage, handling and installation, exposure to unsuitable temperatures, debris or chemicals, and to terms regarding Dimond liability.

Find An Installer

Share to social media