Dimond Durolite HeatGuard Natural Lighting

Dimond Durolite HeatGuard Natural Lighting

Suitable for light commercial

Suitable for commercial

Durolite HeatGuard is manufactured in Auckland.

If this product is not suitable for your project... Click here to find product options suitable for your requirements.

The technologically advanced Durolite HeatGuard range is specially designed to reduce the heat transmitted into the building through natural lighting sheets while still providing a high level of light. The higher the number the less heat it transmits.  Durolite HG4 and Durolite HG8 have infrared reflecting additives in the gel coat which reduce the heat transmitted without losing light transmission.

Product performance is covered by the following warranty

  • Will not suffer excessive yellowing and degradation to cause a light transmission loss of more than 25% from the original value when installed, for a period of 25 years from installation.
  • Will not delaminate, surface erode away, allow protrusion of the reinforcing fibres through the surface, or fracture due to impact from hailstones up to 20mm diameter accompanied by winds of up to 100km/hr, for a period of 20 years from installation.
  • Will not permit water to penetrate right through the sheet for a period of 25 years from date of installation

These guarantees are subject to conditions relating to correct storage, handling and installation, exposure to unsuitable temperatures, debris or chemicals, and to terms regarding Dimond liability.

Find An Installer

Share to social media