Dimond Maxilite Natural Lighting

Check suitability:
- Construction type
- Manufacturing location

Suitable for residential

Suitable for light commercial

Suitable for commercial

Maxilite is manufactured in Auckland.

If this product is not suitable for your project... Click here to find product options suitable for your requirements.

- Suitable for residential
  
  Suitable for light commercial
  
  Suitable for commercial
  
  Maxilite is manufactured in Auckland.
  
  If this product is not suitable for your project... Click here to find product options suitable for your requirements.

A strong stable and cost effective natural lighting sheet. Maxilite is suitable for most industrial and commercial buildings where a low cost sheet is required. Maxilite is a quality 20 micron thick polyester surface film protected translucent sheeting warranted not to lose more than 30% of original light transmission after 10 years of use. Maxilite is the low cost option for commercial buildings helping your budget stretch a little further.

Product performance is covered by the following warranty

Will not suffer excessive yellowing and degradation to cause a light transmission loss of more than 30% from the original value when installed, for a period of 10 years from installation.
Will not delaminate, allow protrusion of the reinforcing fibres through the surface, or fracture due to impact from hailstones up to 20mm diameter accompanied by winds of up to 100km/hr, for a period of 10 years from installation.
Will not permit water to penetrate right through the sheet for a period of 20 years from installation.

These guarantees are subject to conditions relating to correct storage, handling and installation, exposure to unsuitable temperatures, debris or chemicals, and to terms regarding Dimond liability.

Dimond Maxilite Natural Lighting

Check suitability: