Dimond V-Rib Roofing & Cladding
Suitable for 4° and greater
915mm Cover width
966mm Sheet width
Suitable for light commercial
V-Rib is manufactured in
Christchurch.
The clean-cut, striking appearance of V-Rib makes it a very popular roofing and cladding profile used on a wide range of applications from the Comalco Aluminium Smelter at Tiwai Point, Southland to the prestigious Mikano restaurant on Auckland’s waterfront. The symmetrical sections have inherent strength characteristics which provide a good tolerance to foot traffic as well as the title of the strongest drape curved roofing profile available. Where design criteria demands continuous length, economy and simple, speedy construction choose V-Rib.
Components
For sheet materials, underlay, netting and fasteners refer to relevant sections on the website
Drape Curved Sheets
Refer straight sheets.
Roll Curved Sheets
- G300 steel or H36 aluminium (5052 to 5251 alloys) in Corrugate profile is available to a minimum radius of 450mm and a maximum radius of 12m.
- Roll curved sheets are limited to a 4.5m tail length for ease of handling and transportation.
Curved Flashings
Two-piece lock-seamed flashings are recommended to finish curved edges in a smooth line. Crimped flashings are not recommended for aesthetic reasons.
